How to Troubleshoot ‘No device drivers were found’ Error Message

Updated June 2024: Stop these error messages and fix common problems with this tool. Get it now at this link
  1. Download and install the software.
  2. It will scan your computer for problems.
  3. The tool will then fix the issues that were found.

When we try to install Windows 10 or 8 on our PC, we often face the issue of missing driver files. We might see the following error while trying to install Windows on our PC.

Windows failed to start because of a fatal hardware error. A recent hardware change or software upgrade might be the cause. To fix the problem, it is recommended that you run disk clean up, select the “clean up system files” option, and then restart the computer.

Formatting drives is necessary before installing any operating system because it helps to install the OS correctly without any error messages. If you are facing the issue of “no device drivers were found,” then you must format the hard disk properly. You can do this by following the steps mentioned below.

You can install the driver from a USB drive

If you’re having trouble getting Windows 10 to boot up properly, it could be because you’ve installed drivers incorrectly. While there are many reasons why you might see this issue, one of the most common ones is that you’ve installed the wrong driver. If you’re trying to install a driver manually, here’s how to do it correctly.

Step 1: Insert Your USB into Your Computer

To make sure that you have the correct file format, insert your USB into your computer. Once you plug it in, you’ll notice that Windows displays the contents of the USB device.

Step 2: Find the Driver File

Once you’ve inserted the USB, open the Device Manager window and select “Show hidden devices.” From here, you’ll find the name of the device that contains the driver files. For example, my laptop had a device called “USB\VID_0FAB&PID_0001” listed under “Other Devices,” so I selected that option and found the driver file.

Step 3: Download the Driver File

Next, double-click on the.inf file to start the installation process. When prompted, choose “Install the driver software now” and follow the instructions to complete the process.

Updated: June 2024

This tool is highly recommended to help you fix your error. Plus, this tool offers protection against file loss, malware, and hardware failures, and optimizes your device for maximum performance. If you already have a problem with your computer, this software can help you fix it and prevent other problems from recurring:

  • Step 1 : Install the PC Repair and Optimizer Tool. (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to determine what problems you are experiencing with your computer.
  • Step 3 : Click Repair Allto resolve all problems.


You may need to use another USB port

If you still don’t see the “Windows Boot Manager” option, you might want to use another USB port. If you’re having trouble booting into Windows, here are some troubleshooting steps to help you out.

Step 1: Check the BIOS settings

Step 2: Make sure that the USB ports aren’t disabled

Step 3: Reboot the computer and press F12 during startup to enter the BIOS setup menu.

Step 4: Select the USB controller tab and make sure that the USB support is enabled.

Step 5: Reboot again and try booting into Windows.

The partition should be made active

To fix the error message, please follow the steps mentioned below:

Step 1: Open the Disk Management window.

Step 2: Right-click on the Windows partition and select “Properties”.

Step 3: Select the “Partition style” tab.

Step 4: Choose “Active” from the dropdown menu.

Step 5: Click OK.

Step 6: Restart the computer.

Step 7: You will see the following screen.

Step 8: Click Yes.

Step 9: Your system will restart automatically.

Step 10: When it restarts, you will see the following screen again.

Step 11: Click Yes.

The hard drive needs to be formatted

If you are having problems with your hard drive, you might want to try formatting it. This process will erase everything on your hard drive, including files, folders, and even programs. You can use a disk management tool to perform this task.

To open the disk management tool, follow these steps:

Step 1: PressWindows+R keys together to open the Run dialog box.

Step 2: Type diskmgmt.msc into the text field and press Enter.

Step 3: Select the Hard Drive option from the list.

Step 4: Right-click the partition where you want to delete data and select Delete Volume.

Step 5: Wait for the operation to finish.

Step 6: Reboot your PC to complete the installation process.

Set the Boot Device to your DVD or USB and change everything to Legacy

If you are having problems installing Windows 10 on a PC, we suggest that you try changing everything to legacy mode and setting the boot device to your DVD/USB. This might help you out because it worked for us. If you want to know how to do this, keep reading.

Step 1: Turn off your PC.

Step 2: Open up the case and disconnect the power supply cord.

Step 3: Remove the hard disk drive and place it aside.

Step 4: Insert the DVD/USB into the optical drive slot and turn on your PC again.

Step 5: When prompted, select Yes to start the setup process.

APPROVED: To fix Windows errors, click here.

Frequently Asked Questions

  1. Switch to the USB 2.0 port.
  2. Set the partition as active.
  3. Create a new disk drive.
  4. Enable the xHCI-Handoff option in your BIOS.

In the search box on the taskbar, type Device Manager and select Device Manager. Right-click the device name (or hold the mouse button) and select Uninstall. Reboot your computer. Windows will try to reinstall the driver.

Open the Device Manager: right-click in the Start Menu and select Device Manager. Right-click the device whose driver you want to restore, and then select Update Driver. Select the option Search for driver software on your computer. Navigate to the folder where you saved the Windows 10 drivers.