How to solve the emerging problem 70008 in Windows 10

Updated March 2024: Stop these error messages and fix common problems with this tool. Get it now at this link
  1. Download and install the software.
  2. It will scan your computer for problems.
  3. The tool will then fix the issues that were found.

Emerging issue 70008 in Windows 10 is a problem that prevents users from running Windows Store apps.

The Windows Store and Universal Apps make up most of Windows 10, but sometimes you may have problems with the Windows Store programs such as Emerging issue 70008.

Emerging issue 70008 Windows 10

 

What is Emerging issue 70008 and why does it happen?

In this post, we’ll learn about the Emerging issue 70008 and similar issues in Windows 10 that prevent people from running Universal Windows Applications or even the Microsoft Store itself.

As far as we know, other variations or strains of the problem may also affect how the Start Menu feature is used.

A lot of Windows 10 users have reported that apps received from the Store refuse to open. Several reports indicate that the problem in question mostly occurs on Windows 10 systems that use multiple user accounts.

The problem was common enough to draw Microsoft’s attention, and the operating system vendor classified it and identified the Emerging issue 70008 error as a new problem.

 

What are the other similar emerging issues?

Emerging issue 70008 Windows 10 - What are the other similar emerging issues

Emerging issue 70008 can be problematic and can cause many other problems. Users reported the following problems on their computers:

 

  • The emerging problem 67758 is another common problem that can occur in Windows 10. However, we have already covered this issue in our article about the new 67758 release, so you should look for detailed solutions there.

 

  • Emerging message 6619 – This error message can sometimes appear on your computer. In this case, make sure that you have updated your system and downloaded the latest updates.

 

  • Emerging Issue 97275 – In some cases, this error may occur due to your antivirus program. To solve the problem, turn off the antivirus program and see if it solves the problem.

 

How to fix Emerging issue 70008 in Windows 10



Updated: March 2024

This tool is highly recommended to help you fix your error. Plus, this tool offers protection against file loss, malware, and hardware failures, and optimizes your device for maximum performance. If you already have a problem with your computer, this software can help you fix it and prevent other problems from recurring:

  • Step 1 : Install the PC Repair and Optimizer Tool. (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to determine what problems you are experiencing with your computer.
  • Step 3 : Click Repair Allto resolve all problems.

download



 

Fix 1 – Download the Microsoft Troubleshooting Software

Microsoft is aware of this problem and has already published a solution to address it. To apply this solution, you need to download and run a diagnostic program.

After you start the troubleshooting program, follow the instructions to fix the error.

Depending on the users, this problem can be solved by creating a new user account. However, it seems that this problem occurs if you have more than one user account on your PC and if so, we recommend you to download and use the diagnostic tool.

  • Open your web browser. After the program window appears in the address bar or in the existing Google search text field you need to enter the following code: cssemerg70008.diagcab

 

  • In the displayed list of results, click on the first element (usually a link to the Microsoft support site). View the information on the page if you want. Finally, scroll down to the Resolution menu and click on the Troubleshooting link to download the desired file.

 

  • Your browser should extract and save the file on Microsoft servers. Once the download is complete, you need to click or double-click on the downloaded item to start it. Follow the instructions that appear on the screen to ensure that the troubleshooting process identifies and resolves the Emerging issue 70008 problem you encountered on your Windows 10 PC.

If all goes well, you may have to reboot your system for the changes to take effect. If the procedure is successful, you can now launch or open Universal or Microsoft Store applications without problems.

 

Fix 2 – Check your antivirus program

According to users (too significant to ignore), the Emerging issue 70008 in Windows 10 may sometimes arise from your antivirus program. Your antivirus program may interfere with some Windows 10 features, causing this problem.

However, you can solve the problem by simply disabling some features of your antivirus program. If this does not help, you may have to completely disable the antivirus program.

In the worst case, you may need to uninstall the antivirus program. If uninstalling your antivirus program solves the problem, the next step is to switch to another antivirus solution.

We recommend also that you perform the necessary procedures step by step to reduce any consequences or inconvenience that may arise.

  • You can start by turning off your antivirus program to see how it works. Open its application, go to its settings or menu, and find the real-time protection feature or a similar feature you want to disable. Turn on any other dominant feature to which you have access, and look at the new status of your PC.

 

  • As usual, you may need to reboot your system for the changes you make to take effect. If nothing has changed (which means your problem persists), you may have to go to more intrusive procedures.

 

  • If you strongly suspect that your antivirus program is causing your headaches, no one can blame you if you have gone uninstalled. Whatever happens, make sure that you follow the installation process correctly to make sure there are no leftovers or remnants of your antivirus program that could cause problems. At the end of the process, you will need to reboot your computer for obvious reasons.

 

When your computer is turned on and Windows has calmed down, you should check that you can now open and run universal applications or the Microsoft Store itself. If all goes well, you will get almost complete confirmation that the antivirus program is responsible for your problem.

But you can’t leave your system without any security or protection. Your current configuration can cause other problems, some of which are even worse than the ones you just solved.

 

Fix 3 – Use PowerShell

To solve the Emerging issue 70008, some users suggest using PowerShell. It is a powerful tool and if you are not careful, you can damage the operating system.

If you want to be completely safe, you must create a restore point for the system before running PowerShell. To solve this problem with PowerShell, follow these steps:

1.) Press the Windows + S keys and type PowerShell. Right-click PowerShell, then select “Run as administrator” from the menu.

Emerging issue 70008 - Use PowerShell -

2.) When running PowerShell, type the following commands and press Enter after each command:

  • Get-appxpackage -packageType bundle |% {add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “appxmetadataappxbundlemanifest.xml”)}
  • Emerging issue 70008 - Use PowerShell - Step 2

 

  • $bundlefamilies = (get-appxpackage -packagetype Bundle).packagefamilyname
  • Emerging issue 70008 - Use PowerShell - Step 3

 

  • get-appxpackage -packagetype main |? {-not ($bundlefamilies -contains $_.packagefamilyname)} |% {add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “appxmanifest.xml”)}
  • Emerging issue 70008 - Use PowerShell - Step 4

After running all the commands, close PowerShell and see if the problem is solved.

Few users have reported that running the first command solved the problem, so you may not have to run all the commands to solve the problem.

Also, some users have reported that they have solved the problem with the get-appxpackage -allusers | remove-appxpackage in PowerShell, so you might want to try this too.

 

Fix 4 – Install the latest Windows 10 updates

If the Emerging issue 70008 still appears on your PC, you can solve the problem by simply installing the latest updates.

Windows updates contain many patches, and Windows 10 usually downloads them automatically in the background.

However, you can skip one or two updates due to certain problems, but you can always check for updates manually. To do so, follow these steps:

1.) Press Windows + I to open the Settings application.

2. ) Now, click Updates and Security.

Emerging issue 70008 - Install the latest updates - Step 1 and 2

3.) Click the Check for updates button.

Emerging issue 70008 - Install the latest updates - Step 3.png

Windows 10 will now check for available updates. If updates are available, they will be automatically downloaded in the background.

After updating your system to the latest version, check if the problem still persists.

 

Fix 5 – Perform a System Restore

Users (too significant to ignore) reported that this problem occurs after a specific update is installed. To solve this problem, you can perform a System Restore. To restore your PC, you need to perform the following steps:

1.) Press the Windows + S keys on your keyboard and enter Restore. Select Create a restore point from the menu.

Emerging issue 70008 - Perform System Restore - Step 1

2.) Click the System Restore

Emerging issue 70008 - Perform System Restore - Step 2

3.) Then, select Next.

Emerging issue 70008 - Perform System Restore - Step 3

4.) Select the restore point you want to return to and click Next.

Emerging issue 70008 - Perform System Restore - Step 4

After you restore your PC to its previous state, the Emerging issue 70008 error should be gone by now.

If the problem is caused by a problematic update, you can block the update installation with the Show/Hide Update tool.

To use this tool effectively, you need to know exactly which update is causing the problem, so keep a close eye on the recently installed updates.

 

Fix 6 – Perform an SFC and DISM scan

Depending on the users, this problem can sometimes occur due to system file corruption. However, you can easily recover damaged files by performing several scans on your PC.

To do this, follow these steps:

Press the Windows + X button to open the Win + X menu. Select the command prompt (Admin) or Powershell (Admin) from the menu.

Emerging issue 70008 - Perform an SFC and DISM scan - Step 1

2.) Type sfc / scan now and press Enter.

Emerging issue 70008 - Perform an SFC and DISM scan - Step 2

The analysis will now begin. Keep in mind that the scan may take about 10-15 minutes, so do not interrupt it.

After the scan is complete, check if there is a problem. If the problem persists or you are unable to perform an SFC scan, you should perform a DISM scan. Follow these simple instructions:

  • Open the Command Prompt as administrator.
  • Type DISM /Online /Cleanup-Image /Restore Health and press Enter to run it.

Emerging issue 70008 - Perform an SFC and DISM scan - Step 3

  • Scanning will now begin and should take about 20 minutes.

Once the scan is complete, check if there is a problem. If the problem is not solved, please run the SFC scan again.

 

Fix 7 – Create a new user account

If you have a problem with the Emerging issue 70008, you can solve it by simply creating a new user account.

Sometimes your user account can be corrupted, and the only way to solve this problem is to create a new account.

This is quite simple and you can do it by following these steps:

1.) Open the Settings application.
2.) When you open the Settings application, go to the Accounts section.

Emerging issue 70008 - Create a new user account - Step 1

3.) Go to the left window area to Family & other people. On the right side, click Add someone else to this PC.

Emerging issue 70008 - Create a new user account - Step 3

4.) Select I don’t have this person’s sign-in information.

Emerging issue 70008 - Create a new user account - Step 4

5.) Then, choose to Add a user without a Microsoft account.

Emerging issue 70008 - Create a new user account - Step 5

6.) After that, type in the desired username and click Next.

Emerging issue 70008 - Create a new user account - Step 6

After creating a new account, go to it and check if there is a problem. If not, you will need to move all your personal folders to the new account and see if it solves your problem.

 

Fix 8 – Run an on-site update

Depending on the user, you can sometimes solve this problem simply by performing an on-site update.

If you’re not familiar with this system, a local upgrade will reinstall Windows 10 and force you to upgrade to the latest version.

Unlike a regular installation, none of your files are removed, so you can continue from where you left off. To perform an on-site update, you need to follow these steps:

  1. Download and run the media creation tool.
  2. Select the option “Upgrade this PC now“.
  3. Wait until the installation service has prepared the necessary files.
  4. Choose Download and install updates (recommended).
  5. Wait for the updates to be downloaded.
  6. Follow the on-screen instructions until you reach the “Ready to install” screen. On this screen, select Change what to keep.
  7. Choose the Keep personal files and apps and click Next.
  8. Now follow the on-screen instructions to complete the installation.

When the installation is complete, Windows 10 will be updated and reinstalled and the Emerging issue 70008 will be resolved.

Conclusion

If the Emerging issue 70008 problem occurs, it may prevent you from running the programs in the Windows Store, but you should be able to solve it after executing the corresponding PowerShell commands or downloading the necessary updates.



APPROVED: To fix Windows errors, click here.



Frequently Asked Questions

The new number 70008 in Windows 10 is an issue that prevents users from running Windows Store apps.

You can start by troubleshooting Windows 10. If that doesn't work, follow our complete guide to fix this error.

  1. Press the Windows + X button to open the Win + X menu. From the menu, select Command Prompt (Admin) or Powershell (Admin).
  2. Type sfc /scannow and press Enter.
  3. The scan will start. Keep in mind that the scan may take about 10-15 minutes, so do not interrupt it.After the scan is complete, check to see if there are any problems.

  1. Open a command prompt as an administrator.
  2. Type DISM /Online /Cleanup-Image /RestoreHealth and press Enter to run it.
  3. The scan will start and will take about 20 minutes to complete.
  4. After the scan is complete, check to see if there are any problems left.