How to Eliminate ‘Windows Failed to Configure Updates’ Issue

Updated May 2024: Stop these error messages and fix common problems with this tool. Get it now at this link
  1. Download and install the software.
  2. It will scan your computer for problems.
  3. The tool will then fix the issues that were found.

There are many causes of failure when it comes to configuring Windows updates. Many people try to update their operating systems without knowing what they’re doing. This can lead to problems like the one you’re having now. If you’ve been trying to fix this problem for weeks, you might want to consider taking some steps to resolve it. Here are some things you can do to make sure you don’t run into the same issue again.

The most common cause of this error is installing a new version of Windows while running an older version of Windows. You’ll know if you’re doing this because you’ll see a message that says “Windows cannot verify the digital signature.” When you’re prompted to restart your PC, just hit Enter. Don’t worry; this won’t erase anything on your hard drive.

Another possible reason why you’re getting this error is that you’re trying to install a program that requires a newer version of Windows. For example, you could be trying to install Microsoft Office 2016. If you’re seeing this error, you’ll likely need to uninstall Office 2013 and reinstall it.

You might also be experiencing this error if you’re trying to install Windows 10 over an existing installation of Windows 7 or 8.1. To avoid this scenario, you’ll need to perform a clean installation of Windows 10.

Start the update troubleshooter

If you’re having trouble installing Windows 10 version 1809, here are some steps to try. This guide assumes that you’ve already installed Windows 10 version 1803 or earlier. If you haven’t installed Windows 10 version 1809 yet, follow our step-by-step guide to install it.

Windows 10 version 1809 includes several improvements over previous versions, including fixes for Wi-Fi connectivity issues and improved security features. But there are also known issues with the Microsoft Edge browser crashing and freezing, and the Windows Store app is unable to download apps. To fix those issues, we recommend running the Windows Update troubleshooter.

1. The Windows Update troubleshooter scans your computer for potential issues and provides solutions for common problems. You’ll see a notification about the troubleshooting process once it starts.

2. When prompted, choose “Update my PC,” and then follow the instructions.

3. After the troubleshooter finishes scanning your system, you’ll see a summary screen listing any problems found.

4. Click Next to view detailed information about each problem.

5. Then, click Fix Now to apply the recommended solution.

6. You can repeat the troubleshooting process to find additional problems.

Updated: May 2024

This tool is highly recommended to help you fix your error. Plus, this tool offers protection against file loss, malware, and hardware failures, and optimizes your device for maximum performance. If you already have a problem with your computer, this software can help you fix it and prevent other problems from recurring:

  • Step 1 : Install the PC Repair and Optimizer Tool. (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to determine what problems you are experiencing with your computer.
  • Step 3 : Click Repair Allto resolve all problems.


Removable media should be unplugged from the computer

If you are having issues while trying to configure Windows Updates, there could be a few reasons why it fails. One common reason is because of the presence of removable devices like USB flash drives, memory cards, external hard disks, etc., that are attached to your computer. If one of those devices is present, make sure to disconnect them before attempting to update Windows. This way, you won’t encounter any errors during configuration.

Another thing you can do to resolve this problem is to check if any removable media is still connected to your computer. To do this, simply open Device Manager and look for anything labeled “Removable Storage.” You’ll see a list of all the devices connected to your computer. Look out for any device that says “Unknown,” as well as any devices that say “USB Mass Storage Class.” Disconnect any of those devices and try updating Windows again, just to be safe.

Windows Update should be installed in a clean boot state

Windows 10 includes the ability to run some of its core features in clean mode. This allows it to revert certain configuration settings and system files while still allowing essential functions to operate. If you want to use this feature, you must do one thing first: log on to your computer as the local administrator. You can do this via the Start menu, Control Panel, or the command prompt.

1. Open Command Prompt. To do this, press the Windows key + X keys together to open the Charms bar and type cmd into the Search box. Click on the icon labeled Command Prompt to open the program.

2. In the Command Prompt window, type the following command and press Enter:

bootcfg /rebuild “Selective Startup Reset”

This will start the process of resetting the operating system. After this finishes, you’ll see a screen similar to the image below.

3. Go to the System Configuration section, and set the option named Disable Fast Startup.

4. Restart your computer. When prompted, choose to restart in Safe Mode. Once finished, return to normal startup.

System Restore should be performed

If the failure configuring Windows Updates reverting changes issue is continuing to occur even after following the steps listed above, you can attempt a system restore. To do this, follow these instructions:

1. Click Start, type “System Restore,” and press Enter.

2. In the list of options, select “Restore my computer.”

3. Select Next.

4. On the next screen, select “Create a restore point now.”

5. When prompted, enter a name for the restore point, and then select Create.

6. You’ll see a dialog box informing you that the process was completed successfully.

7. Restart your PC.

8. If the issue persists, continue troubleshooting.

Windows Updates should be installed in Safe Mode

Microsoft releases Windows 10 October 2018 Update. This update includes several improvements including security enhancements and bug fixes. However, there are reports of people experiencing issues while installing the update. Some people report that the installation fails and others say that it works fine. People facing problems during the installation process can use the following steps to fix the issue.

To start, restart your PC and press F8 repeatedly to enter the BIOS settings. Once you see the Advanced Options menu, select UEFI Firmware Settings. You will now see the option to change the boot priority. Select the second entry from the list and set it to “Windows”. Press Enter to continue.

Now, turn off your computer and wait for about 30 seconds. When you turn it back on, you will notice that the screen goes blank. Wait for another 30 seconds and power down again. Now, turn on your computer once again and let it boot normally.

This step will allow you to boot into safe mode without having to uninstall any third-party applications.

Utilize the System File Checker

1. Download the latest version of the SFC utility.

2. Type sfc /scannow in the command prompt window.

3. Press Enter and wait for the process to finish. If there are no problems found, press Y to confirm.

4. Close the command prompt window and reboot your computer.

Get rid of all removable peripherals

Sometimes you’ll run into install windows updates errors when removable disks or flashcards become incompatible with the computer. This causes problems during the system restart where updates are installed. First, check the disk drives, USB ports, and memory card slots for any removable media like SD cards, flash drives CD/DVDs.

If you don’t find anything, move on to the next step. If you do find something, go ahead and remove it. Then, reboot the computer and try installing the update again. You might want to make sure there isn’t another update pending.

APPROVED: To fix Windows errors, click here.