Error Code 0x80070003 – 0x2000D: Fixing Windows Update

Updated May 2024: Stop these error messages and fix common problems with this tool. Get it now at this link

1. Download and install the software.
2. It will scan your computer for problems.
3. The tool will then fix the issues that were found.

If you are trying to install a Windows 10 update but have been interrupted by the error message “0x80070003 – 0x2000D, installation failed in SAFE_OS phase with an error during MIGRATE_DATA”, then you are at the right place, as this post will help you solve this problem.

If you get an error like this when you try to update your computer, though there could be several reasons, the main one being that when you go from one update to the next, something stops the update process to migrate user data. To fix this error, you can try running both the DISM tool and the system file checker to automatically fix any corrupted system files. You can also try checking the free space on your primary drive, and if you are using file locking applications such as BitLocker, you should disable them as they may also be the source of the error.

What causes error code 0x80070003 – 0x2000D?

Since the error message appears when using the media creation tool, we have looked at many user reports and found that the problem is often caused by the following factors

Installed third-party applications:

Sometimes the problem seems to be caused by various third-party applications that you have installed on your system. These include third-party VPNs or anything that interacts with your internet connection. Also, if you are using file-blocking software, this can also cause a problem.

Background Services:

Another factor is the interruption of background services due to the update process. This could be a background antivirus software service or something else that interferes with the process.

Insufficient disk space:

Finally, the problem may also arise due to insufficient disk space for the update.
In such a scenario, you need to free up space to complete the upgrade process.
All solutions may not work for you, as they depend on the specific scenario.
So be sure to try them all to ensure a quick solution.

0x80070003 – 0x2000D, Installation in SAFE_OS phase failed during MIGRATE_DATA:

While there are several reasons for the MIGRATE_DATA failure, the main one is that something was stopping the update process from migrating from one update to the next to migrate user data. Here are solutions to fix this error:

Note: Like this error, there are two other Windows 10 update error codes: 8007001f-0x3000d and 0x8007002c-0x400d.

Not all solutions may be right for you, as they depend on the scenario. So be sure to try them all to provide a quick solution.

How to fix Windows 10 update error 0x80070003 – 0x2000D?



Quick note: We recommend creating a system restore point before proceeding with the resolution steps. If the problem occurs during the troubleshooting process, you can get your computer back to its previous working state.

Try performing the steps one by one and see if the update problem is resolved. If the problem persists after each step, you can proceed to the other troubleshooting steps.

Freeing up disk space

If there is not enough free disk space during the upgrade process, the upgrade may end with error 0x80070003 – 0x2000D. So make sure that you have enough space on your C drive.

You can manually search for unnecessary files and delete them. Alternatively, you can try to start a disk cleanup to free up disk space.

Now try updating Windows 10 to the latest version. If the problem persists, you can move on to other steps of the solution.

Remove third-party applications to fix error 0x80070003 – 0x2000D

Some unknown or third-party applications installed on your computer also cause problems and error messages when you upgrade Windows to the latest version.

We recommend that you uninstall the unknown application and the free version of the antivirus program from your computer.

Some Windows applications are installed on your computer by default. Be careful not to remove them. You can search for all VPN programs, free antivirus apps, and uninstall them. To remove an unwanted application, follow these steps.

1.) Press the Windows logo + R keys on your keyboard to open the RUN window, type appwiz.CPL, and then press Enter.

2.) A list of programs installed on your computer will open.

3.) Search for unwanted requests as discussed and remove them

Now restart your computer and try to update Windows to the latest version. This time it should work without error 0x80070003 to 0x2000D. If the error persists, you can proceed to other troubleshooting steps.

Make a clean boot

It’s possible that some background services may be causing this problem and causing the error when you update Windows to the latest version. You can try rebooting and booting your computer with a minimal set of drivers, services, and startup programs. Read the link below to perform a reboot of your computer.

Now try running the Windows 10 update and see if it works without error 0x80070003 – 0x2000D.

Disable BitLocker or other file locking applications

If you use BitLocker or other file locking applications, we recommend uninstalling or disabling these programs and then try to update Windows to the latest version.
This will help to fix Windows 10 update error 0x80070003 – 0x2000D.

The above troubleshooting steps will help you to solve the Windows 10 0x80070003 – 0x2000D update error with the multimedia creation tool. Now you will be able to update your computer to the latest version.

APPROVED: To fix Windows errors, click here.

Frequently Asked Questions