In this IR Cache guide, we’ll show you the steps to fix the ‘AOC USB Monitor Display Not Working’ in Windows 10. When it comes to external monitors, many users prefer the AOC USB monitor. Since it requires no power cable and connects easily via a USB cable, it doesn’t require much effort to set it up. Lately, however, not everything seems to be going smoothly with this monitor.
Recently, several users on the Microsoft forum have reported some problems with this monitor. In this guide, we will look at all the possible causes of this problem. Then, we will list the possible solutions to fix the problem of the AOC USB monitor not working on your Windows 10 computer. Follow the detailed instructions.
Why does my AOC USB monitor not work on my Windows 10 PC?
When you connect your AOC monitor to your computer via USB, or when you turn on the device after you have already connected and used your AOC monitor in this configuration, you can expect the monitor screen to turn on and start displaying content. If the described event occurs otherwise (for whatever reason), consider your monitor malfunctioning and tell me it is not working.
Some users report that the screens on their AOC monitors turn on and off all the time. Others claim to only see the AOC logo. Many users see a dark screen or their monitors remain blank even after connecting to a computer via USB.
We do not know which of the described events occurs in your case (when your AOC monitor stops working), so we cannot say why the device does not work. At best, we can conclude that your problems are related to known problems that affect monitors in general.
How to solve the problem of an AOC USB monitor display not working on a Windows 10 PC
This problem has also occurred to most Surface users. The most likely cause of this problem is a problem with the driver. In addition, these problems were either caused by a Windows update or a bug in the monitor driver. The solution that many users suggest is to update the Display Link driver.
- First, visit the Display Link download page.
- Then click on the operating system you are using. In this article, we will only use Windows.
- Download the latest driver, which is displayed under “Latest Official Drivers”.
- Install the latest version of the downloaded driver.
- Then reboot your laptop or desktop computer and hopefully, the problem will be solved.
Use a short cable to minimize power outages
Many users report that AOC monitors turn on and run for a few seconds or don’t display anything at all. In addition, most Microsoft Surface users have encountered this problem. The solution, suggested and tested by many users, is to use a different cable than the one that came with the monitor.
These USB cables are longer and cause more interruptions in the power flow. Also, USB hubs with the included cable did not generate enough power. Any normal phone charging cable that matches the monitor port (USB 2.0 or USB 3.0) will work.
Reinstall the Display Link drivers
Sometimes external devices can have problems with your device drivers. Many users have reported that their monitors work again after uninstalling and reinstalling the Display Link driver. Display Link is a proprietary Windows application that manages all external display and audio settings and allows users to configure them.
To reinstall the driver:
First press the Windows key and type Control Panel.
- Then click the Uninstall Program button.
- Find Display Link Graphics.
- Click the Uninstall button.
- Then restart your computer.
Frequently Asked Questions
If there is power but no signal when you connect your monitor, the video cable may be frayed. If your AOC monitor supports VGA, DVI, or HDMI, try using a different type of cable to see if your cable or connector is damaged. You can easily purchase these cables from most electronics manufacturers.
Disconnect and reconnect the cable that connects the monitor to your computer and check that the connection is secure. The most common cause of this error is a loose cable. If the monitor displays "No Input Signal", the image is not being transferred from the computer to the monitor.
- Unplug the monitor from the power outlet. Look for open spots in the rubber cover of the power cord.
- Disconnect the VGA cable, the cable that connects your monitor to your computer if your monitor is not recognized by your computer.
- Check the metal contacts on the inside of the connector.
- Adjust the brightness and contrast.
- Disconnect the monitor from the wall.
- Disconnect the cable from the back of the monitor.
- Wait a moment.
- Plug the monitor cable back into the monitor and into a known electrical outlet.
- Press the power button on the monitor.
- If it still doesn't work, try using the power cord, which is known to work.