How to Repair Windows Update Error Code 0xc1900200 on Windows 10

Windows 10 is well known for its exclusive features. But this software is also prone to crashes and corruption just like any other operating system software. And when annoying error codes appear, users get confused and immediately look for solutions. Such problems paralyze the smooth operation of users. One of the most common complications displayed by the system is error code 0xc1900200.

This error signifies a problem in the Windows update process. It occurs due to complications in the installation process, which indicates incompatibility with the operating software. The problem indicates that the device is not compatible enough to download the updates correctly. It indicates that the available memory or processor speed is not sufficient for updating.

When such a problem occurs, users tend to look for immediate and simple solutions. But before doing so, it is important to know what the error refers to and what causes it. However, this article is designed to solve this problem completely and effortlessly. So read on and use this guide to solve the problem.

What causes Windows 10 Update error code 0xc1900200?

Faulty WU component: It turns out that one of the most common reasons causing this particular error code is that one or more Windows Update components are not compliant.

Minimum system requirements not met: Windows 10 cannot be installed on all configurations. If you have a computer with low specs, this may be the cause of an installation failure with this error code.

Damaged system file: In rare cases, this problem may occur due to corruption of important data for your operating system.

Insufficient Reserved Partition Space: Another common cause of this problem is insufficient space in the reserved partition. The update agent relies heavily on this partition and fails if it does not have enough space to free up data.

How to resolve Windows 10 update error code 0xc1900200?

Perform an SFC scan

  1. Open a command prompt as an administrator.
  2. Type sfc/scannow and press Enter.
  3. This tool usually takes 15-20 minutes to scan/restore corrupted data, so wait accordingly.
  4. Then reboot Windows to apply the above changes.

Launch the DISM scan

  1. Use Win + R to launch the “Run” dialog box.
  2. Type “cmd” and press Ctrl+Shift+Enter at the same time.
  3. When the command line appears, copy and paste the following code -.
    DISM.exe /Online /Cleanup-image /Restorehealth
  4. Press Enter and DISM will start scanning and restoring your Windows image.
  5. After receiving the message “Recovery operation completed successfully”, reboot your device.

Download BIOS update files

  1. Go to your computer manufacturer’s website and look for the “Downloads” or “Support” page.
  2. Then enter your motherboard information.
  3. Then download the latest available BIOS version from the list.
  4. Right-click on the downloaded file and select “unzip”.
  5. Finally, locate the file called “Readme”.
  6. This contains all the instructions you need to upgrade to the new BIOS version.

Frequently Asked Questions

  1. Disconnect all USB devices.
  2. Check the system requirements for Windows 10 update.
  3. Deploy the reserved system partition.
  4. Run a system file check.
  5. Reset the Windows update components.
  6. Run DISM.
  7. Update BIOS.

  1. Make sure you have enough memory on your device.
  2. Run Windows Update several times.
  3. Check for third-party drivers and download any updates.
  4. Disable any additional hardware.
  5. Check the Device Manager for errors.
  6. Uninstall third-party security programs.
  7. Fix hard drive errors.
  8. Restart Windows cleanly.

  1. Run the Windows Update troubleshooter.
  2. Run the DISM tool.
  3. Manually reset the Windows Updates components.
  4. Run a system file scan.
  5. Temporarily turn off your security anti-virus program.
  6. Download updates manually.