A BSOD Stop Error 0x0000001e may occur when installing software or updating the operating system. This stop code BSOD Stop Error 0x0000001e often refers to error kmode_exception_not_handled as shown in the following figure :
But do you know what can cause an error BSOD 0x0000001e? In general, this error 0x0000001e can be caused by several reasons. This error kmode_exception_not_handled can be caused by a faulty RAM module or damaged or outdated device drivers.
Regardless of the cause of error 0x0000001e Windows 10 BSOD, the most important is to correct the BSOD Stop Error 0x0000001e.
So in the next section, we will show you how to fix the error kmode_exception_not_handled. Please keep reading.
Before continuing with the solutions, the first thing to do is to reboot your computer and make it a normal Windows system.
What is BSOD Stop Error 0x0000001e?
BSOD Stop Error 0x0000001e is a hexadecimal error format used by Windows and other software vendors for error identification. The 0x0000001e error occurs when the system is unable to intercept the kernel-mode exception.
BSOD Stop Error 0x0000001e is a critical error from which the system could not recover and displays a shutdown message or blue death screen. The error may contain additional parameters depending on the system configuration. These additional parameters describe where the instructions were loaded when the error occurred.
The BSOD Stop Error 0x0000001e can occur in any Windows version. No version of Windows is exempt from BSOD messages, others such as the blue bluescreen bccode 9f, 0x0000007b error, and 0x000000d1 error, and so on.
When the system collides with Bluescreen 0x000000001e, it displays messages and shuts down sharply. When this error occurs, it does not show a warning message on the screen. These errors are a nightmare for any user as they are the main cause of data loss.
These people will surely understand the need to find the cause of this error, who had to rewrite their work report because of the blue screen error 0x0000001e. If you know the cause of the error, you can take preventive measures to prevent it from happening again.
What is the cause of the error BSOD Stop Error 0x0000001e?
We investigated this particular problem by examining various case studies and widely used repair strategies to correct this accident on the blue death screen. It turns out that several different criminals may be responsible for this accident:
- Windows 7 Bug – if this problem occurs repeatedly in Windows 7 or Windows 10, it is most likely caused by an error that was introduced with a security update. If this scenario is correct, you can solve the problem by installing the appropriate patch (Windows 7) or by installing all the pending updates until the patch is installed automatically (Windows 10).
- Insufficient power supply – According to several user reports, this particular problem may also occur if the power supply is not powerful enough to provide enough power to internal components and connected devices. You can test this theory by disconnecting devices that are not absolutely necessary. If the problem is actually caused by the power supply, you should be able to solve it by switching to a better power supply or using a self homing USB hub to unload the power supply.
- Poor RAM – Poor RAM may also be responsible for this type of BSOD. You can check if this scenario applies to your situation by running the Windows Memory Diagnostic Tool. If the results show that RAM memory is bad, the only way to solve the problem is to invest in a healthy equivalent.
- System file corruption – System file corruption is one of the most common causes of this problem. In most cases, the problem is related to the corruption of boot configuration files. If this scenario is applicable, you should be able to solve the problem by performing a DISM or SFC scan or (in exceptional cases) a repair installation.
What does “kmode_exception_not_handled” mean?
It can be a bit tedious and dry to go into details of the “KMode Exception not handled” error. Simply put, this error occurs when applications overwrite each other’s memory, which can lead to BSoD and possibly a complete system crash. Fortunately, this bug is easy to fix.
Before looking for solutions to fix the bug it is necessary to make sure that we have identified the bug correctly.
This message appears on the screen when an error 0x0000001E occurs: “A problem has been detected and Windows has been shut down to prevent damage to your computer“.
Technical information: “STOP: 0x0000001E (0x0000001E, 0x0000001E)“.
What is the cause of the “kmode_exception_not_handled” error?
This error can be caused by one of the following problems:
- Faulty device drivers. It may be caused by a recent update or downgrade of Windows, as well as incorrect configuration, obsolete or damaged device drivers.
- Damaged software or system services
- Incompatible software applications
- RAM is not working properly. Faulty RAM module, causing frequent read or write errors.
- Other hardware problem
How to fix the BSOD Stop Error 0x0000001e
It is a shame to see the blue death screen error 0x0000001e when you have done important work. So you do not want to go back to BSOD and want to permanently solve the problem. Since the causes of the blue screen error 0x0000001e are numerous, the problem will also have many causes. No single solution will be effective for all users. So here are a few ways to fix the message bluescreen0x000000001e Since you are not sure about the cause of bluescreen0x000000001e, you should find the right fix by trying all the patches in order.
Fix # 1: Restoration of damaged random access memory
Before accusing RAM of being a criminal for Bluescreen 0x0000001e, you must make sure that it is. You can use the Windows Memory Diagnostic Tool to diagnose and find RAM errors. To do this, proceed as follows
- Press the Windows + R keys simultaneously to open the command prompt.
- Type the command “mdsched.exe” in the command field and press Enter.
- When the dialog box appears, click on the “Restart now and check for problems” option. This will reboot the computer and start the memory diagnostics.
- The memory check progress is displayed in blue.
If at the end of your work you find that your computer has memory problems, replace the memory with a new one.
Fix # 2: Solving the driver’s problem
If RAM is not the cause of the BSOD Stop Error 0x0000001e, then the problem may be caused by device drivers. The problem may be that the drivers are outdated or incompatible with the version of Windows you are using.
Try updating drivers to solve the problem of outdated drivers. If the problem is that drivers are not compatible, you can disable or uninstall the defective driver. To solve the problem with the :
- Execute the Run command by simultaneously pressing the Windows + R buttons.
- Type “devmgmt.msc” in the text box and click OK to open the Device Manager.
- Then, right-click on the driver and choose what you want to do with it.
- Select “Update driver software” if you want to update the driver software.
- Click “Disable” to disable the driver.
- Choose “Uninstall” to uninstall the driver.
If you have recently installed or updated your device driver before it displays a BSOD Stop Error 0x0000001e, it is very likely that the problem is caused by this driver. You can then uninstall the driver, disable or reset the driver updates.
Fix # 3: Removal of viruses or malicious programs
If the main cause of the common error “BSOD Stop Error 0x0000001e” are viruses, you can use an anti-virus or anti-virus program to clean your computer from these malicious programs.
Perform a full system scan to make sure that there is no more place to hide from the virus. After cleaning your computer from viruses, free up any additional resources that have been occupied by these viruses. Also, there will be nothing left on your computer that can damage the system files.
Fix # 4: Removal of antivirus software
Antivirus software can counteract the error on the blue screen caused by viruses. But what if this is the cause of the error? Sometimes the antivirus software you installed to protect your system can cause many problems and the BSOD Stop Error 0x0000001e cannot be excluded.
If you encounter the message BSOD Stop Error 0x0000001e after updating your antivirus software, you will need to remove the updates to solve the problem. If this does not work, disable the antivirus program or uninstall the program to resolve BSOD Stop Error 0x0000001e.
Fix # 5: System recovery
A few days ago, everything worked fine, but then you do not remember what you were doing, and the computer has a BSOD Stop Error 0x0000001e.
The reason may be a software update, driver update,or other reasons. If you can’t find the cause of the problem, you can try System Restore in Windows at an earlier stage of recovery.
This will restore all device drivers and software updates to the state they were in when the recovery point was created, and hopefully fix the general messages on the blue screen. You can perform a system restore by following these steps –
- Open Start, then find System Restore.
- Start System Restore by clicking on the option that appears in the search results.
- Now select a recovery point where Windows does not show any errors, and then click Next.
- Confirm System Restore and start the recovery process.
Frequently Asked Questions
Blue Screen Troubleshooting with a Restore Point
- On the Select Options screen, select Troubleshooting.
- Click the Advanced options button.
- Click System Restore.
- After your computer restarts, select your account and log in.
There are several possible options that can resolve the BSOD error and get you back to a working computer.
- Reboot or shut down the computer.
- Scan your computer for malware and viruses.
- Check if the RAM is properly connected to the motherboard.
- Defective hard drive.
- Check if the newly installed device is causing a blue screen of death.
- Update Windows and apply all available service packs and security updates.
BSoDs can be caused by poorly written device drivers or faulty hardware, such as faulty memory, power problems, component overheating, or hardware operating outside of its specifications.
In the Windows 9x era, incompatible DLLs or bugs in the operating system kernel could also cause BSoD.
- Select Window Logs on the left side of the window.
- You will then see a series of sub-categories. Selecting one of these categories will display a series of event logs in the middle of the screen.
- All BSOD errors are listed as "errors".
- Double click on an error found to view it.